• Oil-bath lubricated gearbox with hardened, precision ground Ni-Cr steel gears • Quiet operation • Arm height adjustable through elevating screw and elevating motor • Ground and hardened guide ways on arm • Hydraulic operated feed and spindle drive • TR 60, TR 70 and TR 80 with hydraulic-mechanical clamping.
Cooling equipment, work lamp low voltage, table, service wrenches and user’s manual.
Drilling capacity in steel | mm | 40 |
Spindle mount | MT4 | |
Elevating motor | kW | 0.75 |
Motor rating | kW | 3 |
Feeds | mm/giro | 8 (0,10-1,25) |
Speeds | n°/rpm | 16 (32-2500) |
Max. drilling depth | mm | 280 |
Tapping capacity (steel/cast iron) | mm | M30/M36 |
Arm stroke (vertical) | mm | 540 |
Min. spindle nose to table distance | mm | 300 |
Max. spindle nose to table distance | mm | 1120 |
Drill head travel | mm | 1000 |
Distance from spindle to column surface,min. | mm | 300 |
Distance from spindle to column surface, max. | mm | 1300 |
Electrical supply | V/Hz | 400/50 |