HỢP TÁC BỀN LÂU
CÙNG NHAU PHÁT TRIỂN
Hotline
0916 213 311
T-7T2SMY
* Compared with general orthogonal Y axis lathe, Y axis with moving column makes structure larger and more stable. We changed the design makes Y axis under X axis slide, reduce the height of whole machine to save transportation cost.
* 90 degree orthogonal Y-axis without cutting blind angle, it is offer full cutting travel, and single axial precision movement and positioning.
* Machine X2 axis drive by H.T.D belt, the other axes drive by motor, which reduces belt broken service time.
* Built-in spindle
Both spindle and sub spindle are installed A2-6 built-in spindle, the high cutting speed makes small workpiece surface as a mirror. When cutting large workpiece low speed and high torque mode provide maximum output, avoid tool edge broken to reduce the unnecessary cost.
|
Max. swing |
mm (in) |
790(31.1) |
|
Max. turning diameter |
mm (in) |
470(18.5) |
|
Max. turning length |
mm (in) |
770(30.31) |
|
Bar capacity |
mm (in) |
52(2.04) |
|
X1 axis travel |
mm (in) |
235+15(9.25+0.59) |
|
X2 axis travel |
mm (in) |
220+10(8.66+0.39) |
|
Z1 axis travel程 |
mm (in) |
770(30.31) |
|
Z2 axis travel |
mm (in) |
790(31.1) |
|
B axis travel |
mm (in) |
770(30.31) |
|
Y axis travel |
mm (in) |
±50(±1.96) |
|
Spindle speed |
rpm |
3800 |
|
Chuck size |
in |
8 |